NANO Pi Wifi board Freindly ARM

The NanoPi is a low power consumption, Samsung S3C2451 based ARM SOC that FriendlyARM developed for Linux hackers, Hobby makers and hobbyists. Its size is only half of the Raspberry Pi(RPi) and its GPIO pin is compatible with the RPi’s. The NanoPi integrates both the WiFi and Bluetooth 4.0,and has MiPi sockets for cameras and LCDs. It is easy to run and install Linux/Debian from a TF card. These features make it a good platform for applications in IOT, unmanned vehicles, drones and intelligent devices.NanoPi FeatureCPU: Samsung S3C2451, 400MhzRAM: 64M DDR2Integrated SDIO WiFi and BluetoothUSB Type A x1Debugging Serial Port x1microSD Slot x1microUSB x1: for power and data transmission. It can be configured as a serial port or EthernetLCD Interface: 0.5mm spacing FPC socket, full color LCD (RGB:8-8-8)DVP Camera interface：0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IOGPIO1: 2.54mm spacing 40pin, compatible with Raspberry Pi’s GPIO. It includes UART, SPI, I2C, IO etcGPIO2: 2.54mm spacing 12pin. It includes I2S, I2C, UART etc.PCB dimension: 75 x 30 mmPower: DC 5VBootloader and OS: u-boot, Linux-4.1 and Debian   Debian Explore the Linux distribution shipping with Nnaopi, customized with Python, C and more programs right out of the box   Linux+Qt Standard Linux system with QT system, support Python and C program. Run the system on the TF catd. support WiFi and Bluetooth connect.   Smart Car Design a Smart Car with the NanoPi, Controlled by WiFi and Bluetooth, Add it later…    Helpful Project  Quick Start for NanoPiQuick Start for NanoPiSSH Connect & WiFi ConfigureDevelopment GuideBuild U-Boot from sourcesBuild Linux KernelCreated the File systemResource for NanoPiHardware Resource DownloadLinux System Source download