HC-11 433MHz wireless RF serial UART module CC1101 5V 3V AT command

Detailed Product Description http://tuopudianzi.com/HC11/HC11.pdfHC-11 433MHz wireless RF serial UART module CC1101 5V 3V AT command 1.3.4MA the Silent current ultra-low power consumption.2.Long-range,on the open environment ,transmission distance can reach 200 meters straight line3.3-5V wide voltage4.Support for serial pass through mode to replace the serial cable (half duplex)5.Support IO level to follow, also means that any form of transmission digital level models.6.Support IO level latch mode7.You can set the frequency and set the address, and dozens of instructions, automatic filter8.Small size (13.5 × 28.2mm).1.3.4MA Silent current ultra-low power consumption. 2. Long-range in the open environment, the transmission distance can reach 200 meters straight 3.3-5 V wide voltage 4. Support to pass through the serial mode to replace the serial cable (half duplex) 5. Support IO Following level, also means that any form of digital-level transmission models. 6. Support mode lock level IO 7. You can set the frequency and set the address, and dozens of instructions, automatic filter 8. Small size (13.5mm × 28.2mm  to 3.3 V voltage, and then go drag down pins 5 (went down), the module is NO mode instructions, push the output command mode instructions as described below.  1. aT send this command will return characters OK. example: hair aT return OK 2. aT + V module to return version information. eg. aT + V hair to return to the HC-11 _ V0 0 3. aT + Bxxxx . the potter rate set to XXXX this value is 0960 0192 00384 00576 2400480 00115 200. Ex 1: hair aT + B4800 back OK-4800 example 2: hair aT + B115200 OK-115200 return 4. aT + Cxxx configuration of the communication channel from 001-127 can be chosen.. example: hair aT + C058 return OK-058