XD-06 Tilt sensor module

Tilt sensor module tilt switch microcontroller module electronic building blocks XD-06 robot(Sensor can sense changes in body angle (accuracy can reach 15-45 degrees(Adjustable sensitivity (shown in blue digital potentiometer adjustmentOperating Voltage 3.3V-5V(Output format: digital switching outputs (0 and 1With fixed bolt hole for easy installationSmall PCB board size: 3cm * 1.6cm(Power indicator (red) and the digital switch output indicator (greenUsing LM393 comparator chip, stable(Life: at room temperature and normal life of up to 100,000 times switch (times / 1sec:(Interface Description (3-wire1. VCC external 3.3V-5V(2. GND GND External 3. DO digital output inter faces (0 and 1:Instructions for use1.Tilt switch sensor using MEC original SW-460D, high sensitivity2.DO digital output interface can be directly connected to the microcontroller IO port:ApplicationTire Pressure Monitoring System (TPMS), bicycle lights, digital photo frame rotation, screen rotate, flip video camera, anti-theft system:Test Description51 development board with tilt sensor module test1.Module VCC connected to development board VCCModule GND connected to development board GNDConnect the VCC and GND, module power indicator lights2.The module level light up on the desktop, the module slowly rotating in one direction, the switch indicator lights, and then rotate in the opposite direction module back to the original state, the switch light off. This phenomenon is explained, changing the angle of the sensor can trigger module, so that the switch indicator lights