English Super Handheld Rfid NFC Copier Reader Writer cloner

Description:Frequency:H-ID125KHZ,250KHZ,375KHZ,500KHZ,625KHZ,750KHZ,875KHZ,1000KHZ,13.56MHZ1.HD3.2 inch full color screen, the display effect is clear.2.ID/IC full hand, voice broadcast. (pronunciation skills in China)3 can replicate these frequencies of the card ID with IC card: 125KHz, 250kHz, 500KHz, 375KHz, 750kHz, 875KHz, 1000KHZ, 13.56MHz,H-  ID4.Digital key input number can be directly input.5.4 AAA batteries, standard mobile phone, easy to carry. Also can use USB line power supply. (due to air transport, the product does not contain batteries, please bring your own).6.Comes decoding, direct preparation of various types of smart card access door.7.It can crack the encryption card. How to Crack encryption 13.56Mhz cards: Please read it carefully and follow the steps as below: When the 13.56mhz cards have encrypted,it should be using the software to crack the cards. Conneted with copier with computer via USB cable, then Press the on/off button, then the copier will be show the Disclaimerpage, NOT press any button on the Copier, then your computer will show a removeable disk, open the disk, there are the manual and the software, Press the button OK to agree with the Disclaimer on the computer fistly, then argee with the copier’s Disclaimerpage, that’s will be connect successfully, put your original cards on the back side of the Read/Write area, then press the button scanto crack the passwords, after 2 or 5 minutes,the passwords will be cracked successfully, then put one UID cards in the read/write area, then presswrite“button, that will be ok.   How to copy the 125khz RFID cards: Press the on/off button, put the original 125khz cards on the back of the copier, then the copier will be show the Disclaimerpage, Press ok button, then put the cards on the back side of the copier, then pressscan, then the copier will auto scan it is 125khz cards, and the copier will show the card number, then we put one writable EM4305 key on the back side of the copier, then pressWrite, then that will be write succesfully.​