E18-MS1-PCB CC2530 zigbee based

[IC] : CC2530[Frequency] : 2.4~2.48GHz[Power] : 4dBm[Distance] : 0.2km[Interface] : IO[Introduction] : E18-MS1-PCB is based on original imported RF chip CC2530 form TI in American. The IC chip is integrated with 8051 microcontroller and wireless transceiver inside, which is applicable to Zigbee design and 2.4GHz IEEE 802.15.4 protocol. All the IO ports are led out by the module, which means that multi-aspect development is realizable. RF Parameter Value Remark Working frequency 2400~2480 MHz Default:  2.4GHz Transmitting power 4 dBm About 2.5mW Receiving sensitivity -96.4 dBm Air data rate: 250kbps Communication protocal ZigBee – Test distance 200m In open and clear air, with maximum power, 5dBi antenna gain, height of 2m,  air data rate: 250kbps   Hardware Parameter Value Remark IC CC2530F256RHAT/QFN40 – FLASH 256 KB – RAM 8 KB – Core Industry-standard enhanced 8051 MCU – Size 14.1 * 23.0 mm – Antenna type PCB – Communication interface SoC – Package SMD –     Electronic parameter Min. Typ. Max. Unit Condition Power supply 2.0 3.3 3.6 V   Communication level 2.0 3.3 3.6 V   Transmitting current 26 28 31 mA 4dBm（2.5mW） Receiving current 25 27 30 mA   Sleep current 0.6 1.2 1.8 μA   Operating temperature -40 20 +85 ℃   Operating humidity 10 60 90 %   Storage temperature -40 20 +125 ℃     Related Products Pin No Pin item Pin direction Pin application 1 GND Input    Ground 2 VCC Input    Power supply 2.0V ~ 3.6VDC 3 P2.2 Input/output    MCU GPIO 4 P2.1 Input/output    MCU GPIO 5 P2.0 Input/output    MCU GPIO 6 P1.7 Input/output    MCU GPIO 7 P1.6